PAINT BAKING OVEN

PAINT BAKING OVEN

Paint Baking Oven:

After painting, article passes through the paint baking oven as per baking schedule. In which air circulation blower and heating system is given. Before paint baking oven the flash off zone are given for solvent evaporation and this is preventive enclosure.

Batch type oven:

In which paint coated articles are loaded on the trolley and then trolley is pushed inside the oven, after baking scheduled trolley taken outside the oven. For this oven trolley arrangement and doors are provided.

Conveyorised conventional oven:

In this paint coated articles are hung on the conveyor and then conveyor carries the article through oven. Article travels through the oven as per paint baking schedule. In this oven article entry and exit cut out is provided perpendicular to the ground.

Conveyorised camel back oven:

In this oven, all working is same as Conveyorised conventional oven only difference is the article entry and exit cut out is provided parallel to the ground for the reduction in heat loss. This oven is working on two principles.

Natural air flow

As the hot air has low density so hot air inside oven goes to upper side of oven due to which at article entry and exit cut out provided parallel to ground forms a layer of hot Air.

Natural draft

As the layer is formed on article entry exit cutout the hot air trapes their because of natural air pressure is high and hot air pressure is low and air always flows from high to low. And that helps to reduce heat loss from article entry exit cutout.