Gurmukh Engineering Works

LIQUID PAINTING PLANT:

Liquid Painting Plant:

Paint is any pigmented liquid, liquefiable, or mastic composition that, after application to a substrate in a thin layer converts to a solid film. Painting involves the spreading of liquid paint over the article surface. Specialize gloss and metallic colours are available in liquid paint.

1. Dip Painting Plant:

Conveyor carries the article through tank for a required time. Article get uniformly painted and then same track passed through the paint baking oven. In this tank we also provide churning system for separation of solvent in the paint.

2. Spray Painting Booth:

Dry booth: This type of booth is used where work paint consumption is minimum. In this booth mechanical or paper filters are used. This type of booth is easy for cleaning and maintenance.

Side draft water wall type booth: In this type of booth constant flow water wall is provided at back side of the article. The overspread paint flows downward with water then it goes through the whirl plate where whirling action takes place due to which thinner comes over the water and it suck through the blower where thinner pass through the baffle plate for removing of water Droplets. Application of this booth is used where paint consumption is more.

Downdraft booth This type of booth is having suction draft from the top to the bottom of the booth. Constant flow water wall is provided at the bottom of the booth. The over spread paint flows with the water in washing chamber. Application of this booth is for heavy Article.

Flash off Zone

Flash off zone is given to evaporate solvent at room temp after painting. An enclosed chamber of fabricated sheet metal panels with window view glass and exhaust blower to throw solvent contaminated air out of shop floor.

PRESSURIZATION ZONE

DescriptionIt is controled atmosphere encom provided around the panting bowder coating booth to avoid dust particles on component in which a pre-red or is passed to secondary in situated in perum chamber A ant into working area through loyer of ceiling files of specific vocity with postive pressure

Features Benefits:

•  Helps to control atmosphere around powder coatingpainting booth, increasing quality of coating conditions
•  Also provides fresh air to operator inside the chamber
•  As powder paint is coated in controlled atmosphere it gives better finish quality after baking in oven.

SPECIAL PURPOSE OVEN

We are also into manufacturing of special purpose oven up to 800°C for processes
•  Bonding ovens.
•  Annealing ovens.
•  Baking after flux.
•  Stress releasing ovens.